View source for Hardware Components

Below is a list of components current used on the Drogon Quadcopter:

== Power/Lift ==
 
* [//www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=34236&amp;aff=1101574 Hobbyking X580 Glass Fiber Quadcopter Frame w/Camera Mount 585mm]
* [//www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25556&amp;aff=1101574 AX-2810Q-750KV Brushless Quadcopter Motor]
* [//www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=27776&amp;aff=1101574 Turnigy Multistar 30 Amp Multi-rotor Brushless ESC 2-4S (OPTO)]
* [//www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8932&amp;aff=1101574 Turnigy 2200mAh 3S 20C Lipo Pack]
* [//www.vexrobotics.com/276-2153.html Vex Robotics Radio Transmitter/Receiver]

== Electronics ==

* [//www.adafruit.com/products/1076 Arduino Due]
* [//www.adafruit.com/products/1344 Raspberry Pi Model B]
* [//www.adafruit.com/products/814 Miniture WiFi Module]
* [//www.newark.com/jsp/search/productdetail.jsp?sku=69W0689 Raspberry Pi Camera Module]
* USB Hub, powered
* Custom Arduino Interface Shield
** [//www.adafruit.com/products/187DIY Shield for Arduino]
** [//www.sparkfun.com/products/9269 3-Axis Accelerometer Breakout - ADXL335]
** [//www.adafruit.com/products/1032 L3GD20 3-Axis Gyroscope Breakout Board]
** [//www.adafruit.com/products/735 Logic Level Shifter] (level shift 5v Vex Robotics Receiver with 3.3v Arduino Due)
** RJ-11 Jack (for Vex Robotics Receiver)
** LEDs/Resistors
** Molex 2 and 3 pin latched connectors
** Solid core wire
* To Be Added
** [//www.sparkfun.com/products/8959 Infrared Proximity Short Range]
** GPS
** XBee Wireless Communication Module

[[Category:Project]]